For construction teams that move fast.

Build professional
submittals in seconds

Upload your spec book, pick products that meet it, and send out a package with the proof highlighted on every page. No more nights lost to cut sheets and highlighters.

Get early access

We're invite-only right now. Create an account and we'll email you when we launch.

A closer look at your next submittal Pick a finding to see the proof
Harborview Community Center05 50 00
Linked sources
Titen_HD_Catalog.pdf2 pages
SST
SIMPSONStrong-Tie
ANCHORING SYSTEMSProduct data · THD series
CONCRETE & MASONRY

Titen HD®

Heavy-Duty Screw Anchor

Mechanically galvanized carbon steel
For cracked and uncracked concrete

SUBMITTED PRODUCTTHD62500HMG5/8 in. diameter × 5 in. length

01 / Product overview

A high-strength screw anchor for attachment of structural steel plates, equipment supports, and metal fabrications to concrete. The hex-washer head bears directly on the fixture.

Typical applications
  • Base plates and steel brackets
  • Handrail and guardrail supports
  • Equipment and fixture anchorage
Product features
  • Threaded mechanical interlock
  • Removable for temporary work
  • Standard fractional-inch sizing

02 / Code compliance & certifications

03 / Selection notes

Select anchor diameter, length, and finish for the project conditions. Confirm effective embedment, fixture thickness, and exposure before ordering.

Continued on page 2Dimensions, embedment range, materials, and finish.
TITEN HD · PRODUCT DATASample project · Illustrative review copy1 / 2
Titen HD®TECHNICAL DATA / MECHANICALLY GALVANIZED

Dimensions & material data

Selection reference for the submitted heavy-duty screw anchor.

04 / Anchor dimensions

Nominal dimensions · inches
DiameterLengthEmbedment
1/41-3/41-5/8
3/832
1/242-3/4
5/853-1/4
3/486-1/4

05 / Materials & finish

06 / Installation notes

  1. Drill to the diameter and depth for the selected anchor.
  2. Clear drilling dust and debris from the hole.
  3. Install through the fixture to the specified embedment.

Use the current manufacturer's instructions and evaluation report for final design and installation.

TITEN HD · PRODUCT DATASample project · Illustrative review copy2 / 2
2.1.C · Catalog evidence
1 / 2
Verified98% confidence

This catalog satisfies the requirement.

The specification requires a current ICC-ES evaluation report covering use in cracked concrete (Section 05 50 00).

Every finding linked to its source. Every final call is yours.

How it works

Four steps to a cleaner submittal

Upload the spec, pick your products, and send out a package with the compliance proof already marked

Project SpecificationSection 06 10 53
Miscellaneous Rough Carpentry
PART 2 - PRODUCTS
2.1 LUMBER, GENERAL
A. Fire retardant treated lumber shall have a flame spread index of 25 or less per ASTM E 84.
2.2 WOOD TREATED MATERIALS
B. Kiln dry lumber after treatment to a maximum moisture content of 19 percent.
2.3 MISCELLANEOUS
2.4 FASTENING
06 10 53Miscellaneous Rough Carpentry
36 requirements · Pages 41-45 · 5 types

Upload your spec book

Submittal Builder reads the whole spec, splits it into divisions and sections, and pulls out every requirement your products have to meet

Project SpecificationSection 06 10 53
Miscellaneous Rough Carpentry
PART 2 - PRODUCTS
2.1 LUMBER, GENERAL
A. Fire retardant treated lumber shall have a flame spread index of 25 or less per ASTM E 84.
2.2 WOOD TREATED MATERIALS
B. Kiln dry lumber after treatment to a maximum moisture content of 19 percent.
2.3 MISCELLANEOUS
2.4 FASTENING
06 10 53Miscellaneous Rough Carpentry
36 requirements · Pages 41-45 · 5 types

Pick compliant products

Search a growing library of vendor catalogs by product name or by the requirement itself, and see which requirements each product meets before you commit to one

Sample search · Select a product to explore its evidence

Annotate

Run the annotator to highlight where each requirement is met and flag what falls short, requirement by requirement

SST

SIMPSON STRONG-TIE

Engineered Structural Connectors

Catalog Page

THD-025

Titen HD®

Heavy-Duty Screw Anchor

For Cracked and Uncracked Concrete

High Strength

Carbon steel with zinc coating

Code Listed

ICC-ES certified

Cracked Concrete

Approved for seismic

Code Compliance and Certifications

ICC-ESESR2713

ICC-ES Evaluation Report ESR-2713 for cracked and uncracked concrete

  • Cracked and uncracked concrete applications
  • Seismic Design Categories A through F
  • IBC 2021, IBC 2018, IBC 2015 compliant

Technical Specifications

DiameterLengthEmbedmentTension (lbs)Shear (lbs)
1/4"1-3/4"1-5/8"1,2501,875
3/8"3"2"2,8304,500
1/2"4"2-3/4"5,1008,050
5/8"5"3-1/4"7,87512,520
3/4"8"6-1/4"11,25017,900

Values shown for f'c = 4,000 psi normal-weight concrete. See technical data for complete load tables.

Materials and Coating

Base Material

Carbon Steel

Coating Type

Mechanically Galvanized

Coating Standard

ASTM B695, Class 65

Corrosion Resistance

Moderate, interior or dry exterior

Note: For high-corrosion environments, specify stainless steel or hot-dip galvanized options.

Installation Requirements

1. Drill hole using an ANSI-standard carbide drill bit to the specified diameter.

2. Clean the hole of dust and debris using compressed air or vacuum.

3. Install the anchor to minimum embedment depth using an impact wrench or socket wrench.

WARNING: Do not use impact wrenches for installations in hollow CMU or lightweight block.

Simpson Strong-Tie Company Inc.

www.strongtie.com

THD-025 Rev. 03/2024

Page 1 of 4

Export

Generate the submittal cover sheet and part list, then send out a package whose highlights open in Adobe Reader and Bluebeam

Submittal cover sheet
Harborview Community Center
Anchor Bolts and Fasteners · 05 50 00 · Rev 1
1 Verified 1 Caution 1 Critical
Part list
Titen HD® Mechanically Galvanized Screw Anchor
Simpson Strong-Tie
p.1
Titen HD® Heavy-Duty Screw Anchor, Zinc Plated
Simpson Strong-Tie
p.2
X-P Premium Concrete Fastener
Hilti
p.3
Cover sheet + annotated catalog pages

Features

Everything between the spec book and approval

Every feature answers the same question: does this product meet the spec, and can you prove it?

Spec requirement extraction

Upload the spec book and get every requirement pulled out into a clean, searchable list. Materials, dimensions, code standards, and finishes, section by section.

Spec requirements06 10 53
Project SpecificationSection 06 10 53
Miscellaneous Rough Carpentry
PART 2 - PRODUCTS
2.1 LUMBER, GENERAL
A. Fire retardant treated lumber shall have a flame spread index of 25 or less per ASTM E 84.
2.2 WOOD TREATED MATERIALS
B. Kiln dry lumber after treatment to a maximum moisture content of 19 percent.
2.3 MISCELLANEOUS
2.4 FASTENING
06 10 53Miscellaneous Rough Carpentry
36 requirements · Pages 41-45 · 5 types

Search by requirement

Type the requirement itself, like a galvanizing spec or an ASTM standard, and search a growing library of vendor catalogs for the products that satisfy it, ranked by how many requirements they meet.

Product discoverySample search

Sample search · Select a product to explore its evidence

Project workspaces

Every spec, submittal, and revision lives under its project, so a resubmit never starts with a file hunt.

Project files
Harborview Community Center
Anchor Bolts and Fasteners
Rev 1Returned for correction
Rev 2Approved

Reviewer control

Step through every finding, override a verdict, and add notes before anything leaves your desk. The final call is always yours.

Review note
CautionCoating specification mismatch
Supplier confirmed hot-dip galvanized finish for all exterior anchors.

Exports that open anywhere

Highlights are saved as real PDF markups with the spec language quoted, so they show up in Adobe Reader and Bluebeam like you made them yourself.

PDF markup
Section 05 50 00 · Page 2
Exterior anchors shall be hot-dip galvanized in accordance with ASTM A153.
Highlight added by Submittal Builder
Spec 05 50 00 2.1.A requires exterior anchors to be hot-dip galvanized per ASTM A153.

Use Cases

For everyone who touches a submittal

Whether you build packages, review them, or price the work, the spec reading that eats your week gets done in minutes

Subcontractor PMs

Turn the GC's spec section into a clean, compliant package without giving up a night to cut sheets and highlighters

Project engineers

Upload a sub's package and check it against the spec book, with every requirement already matched to the page that answers it

Estimators

Find products that meet the spec while you price the job, instead of discovering substitutions after the award

Benefits

Days of spec work, done in minutes

Submittals go out sooner, procurement stays on schedule, and fewer packages come back marked Revise and Resubmit

Send it out sooner

Build a package in an afternoon instead of a week, and stop being the reason procurement is waiting

Fewer rejections

Reviewers see the proof highlighted next to the spec language, which makes approving easy and arguing hard

Proof on every page

Every compliance claim points to the exact line in the catalog that backs it up, so your package argues for itself

One connected workflow.From the first spec to the final package.
Connected
Spec uploaded
Sample project / 05 50 00Harborview Community Center
Project specification
Selected products
Annotated package
Files and review notes, together.

Stop re-reading the spec

Requirements are extracted once and searchable forever. No more flipping back to section 05 50 00 to double-check a finish

Catch misses early

Requirements nobody addressed get flagged before you send, not by the architect three weeks later

Every project in one place

Specs, submittals, revisions, and review notes live under the project they belong to, so handoffs do not start with a search through email

Early access

Private early access

Submittal Builder is invite-only right now.

© 2026 Submittal Builder. All rights reserved.